DOCTORAL DISSERTATIONS

In Progress
1.
Komvokis, V., “Synthesis, characterization and evaluation of new nano-structured catalytic materials used for the reduction of nitrogen oxides in industrial exhaust gases”, (2004)

Completed
1. Bollas G., “Dynamic simulation, optimization and control of flexible catalytic cracking units”, (2004)
2. Christoforou S., “Selective catalytic reduction of NOx with hydrocarbons from fuel gases of industrial units”, (2000)
3. Heracleous E., “New selective catalytic process of ethylene production”, (2002)
4. Iliopoulou E.F., “Reduction of NOx emissions from the flue gases of the regenerator of the Fluid Catalytic Cracking Unit using catalytic additives”, (2004)
5. Machli M., “New catalytic materials structure and activity study during the oxidative dehydrogenation of propane”, (2002)
6. Valla, I., “Development of new catalytic systems and processes for the removal of sulfur containing naphtha components for the production of environmental gasoline”, (2004)

 

DIPLOMA THESIS

1. Marti M.(2004), “Study of the synthesis, hydrothermal stability and acidic properties of aluminosilicate mesoporous MCM-41 materials”
2. Karakoulia S.(2004), “Preparation and Characterization of zeolites modified with transition metals and evaluation of them as substrate for the synthesis of carbon nano-tubes”
3. Panou C.(2004), “Modeling of Thermo-programmed reduction of solid substances”
4. Gogaki S.(2004), “Study of the division mechanisms of the precursor compounds and the V2O5/TiO2, V2O5/Al2O3 catalysts via thermal analysis methods”
5. Panou K.(2004), “Modeling of Thermo-programmed reduction of solid substances”
6. Psarras A.(2004), “Mechanisms of sulphur reactions during the process of catalytic cracking
7. Nikolopoulos O.(2004), “Biomass pyrolysis”
8. Mouriki E.(2004), “Study of the division of heavy sulphides during the process of catalytic cracking”
9. Galatsianou M.(2003), “Hydrogen production technologies review”
10. Evdou A.(2003), “Study of Catalysts Ag/Al2O3 in selective catalytic reduction of nitrogen oxides by hydrocarbons”
11. Boudouris C.(2003), “Mathematical modeling of thermal oxidative dehydrogenation of ethane and propane”
12. Katsikoulis M., Kyriakos G.(2003), “Modeling of the thermal catalytic elaboration reactor”
13. Psarras A.(2003), “Development of reaction kinetic models for the reduction of sulphur in FCC gasoline”
14. Nikopoulos O.(2003), “Production and quality control of biooil produced from catalytic biomass pyrolysis”
15. Kanaki A.(2003), “Development of Catalytic Additives for the reduction of gasoline sulfur produced from gasoil pyrolysis”
16. Chatzis M.(2002), “Recording of the operation of the Hellenic Petroleum FCC Unit before and after revamping of the SCT unit”
17. Stathopoulos S.(2002), “Metal deposit on catalysts”
18. Tourliti V.(2002), “Catalytic systems for sulfur removal from FCC gasoline”
19. Rendi E.(2002), “Catalytic biomass pyrolysis in a fixed bed reactor”
20. Martavaltzi C., Theodosiadis K.(2002), “Simulation of thermal steam-cracking and oxidative dehydrogenation units for the production of ethylene using the ASPEN plus programme”
21. Katsikoulis M., Kyriakos G.(2002), “Simulation of the catalyst thermal process reactor”
22. Vlachomitrou M.(2001), “Development of mathematical modells for the prediction of products yields from FCC’
23. Gogaki S.(2001), “Application of thermal analyis on catalysts for the selective oxidation of hydrocarbons”
24. Dimitroulas M.(2001), “Light olefines production via selective oxidation of propane and ethane’
25. Theodorou Z., Rafailidis L.(2001), “Modeling of the C.P.E.R.I. FCC pilot plant unit with neuronic networks”
26. Kambas P.(2001), “Production of i-butylene with catalytic dehydroisomerization of n-butane”
27. Dourou I.(2001), “Catalytic cracking of heavy feedstocks- effect of Ni, V metals”
28. Stathopoulos S.(2001), “Deposition methods and effects of Ni, V, Fe metals on the FCC products”
29. Tourliti V.(2001), “Technologies for the reduction of sulfur in the FCC gasoline”
30. Chatzis M.(2001), “Mathematical simulation of the industrial FCC unit of HELPE/HAR”
31. Lorentzou S.(2001), “Probing study of the spray pyrolysis process for the production of nanoparticles”
32. Voulouvoutis A.(2000), “Oxidative Dehydrogenation of Propane’
33. Makridis A.(2000), “Methane reforming with Carbon Dioxide in the presence of Ni catalysts”
34. Orphanidou X.(2000), “Preparation and characterization of vanadium catalysts”
35. Kabas P.(2000), “Production of I-bytylene with catalytic dehydroisomerization of n-butane”
36. Dimitroulas M.(2000), “Light olefine production via selective oxidation of propane and ethane”
37. Vlachomitrou M.(2000), “Development of new catalytic systems and processes for the removal of sulfur containing naphta components for the production of environmental gasoline”
38. Stathopoulos S.(2000), “Deposition methods and effects of Ni, V, Fe metals on the FCC products”
39. Moustakeas K.(2000), “Study of filers for soot particulates”
40. Bollas G.(2000), “Development of kinetic modells for the prediction of products yields in the Fluid Catalytic Cracking (FCC) unit”
41. Lampridis S., Moustakas G.(2000), “Characterization of Diesel droplets produced from batch operating spray nozzles applying the Phase Doppler technique”
42. Gkagkas S.O., Nikolidakis A.(2000), “Comparative study for the evaluation of methods measuring particulates and powders”